KTM F4303U1, Owner'S Manual

Page: 61 / 130

SERVICE WORK ON THE CHASSIS 12
59
Warning
Danger of accidents The seat can come loose from the
anchoring if it is not mounted correctly.
–
After assembly, check whether the seat is correctly
locked and cannot be pulled up.
–
Finally, check that the passenger seat is correctly mounted.
12.8 Removing the front rider's seat
Preparatory work
–
Remove the passenger seat. ( p. 58)
H01993-01
Main work
–
Raise the rear of the front rider's seat, pull it towards the rear,
and remove it upwards.
12.9 Mounting the front rider's seat
H01994-01
Main work
–
Attach the front rider's seat in area
A
and lower at the rear.
–
Finally, check that the front rider's seat is correctly mounted.
Finishing work
–
Mount the passenger seat. ( p. 58)
12.10 Checking for chain dirt accumulation
400678-01
–
Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
–
Clean the chain. ( p. 60)