KTM F4303U1 Owner'S Manual Download

Page: 27 / 130

COMBINATION INSTRUMENT 7

ODO

display (

p. 26)

ABS mode

Coolant temperature indicator (

p. 26)

Fuel level display (

p. 27)

Bluetooth

(optional)

Time (

p. 27)

SET

Only shown where the menu overview is closed.

Favourites

display (

p. 27)

7.7

Speed

M01581-10

The speed

is measured in revolutions per minute.

7.8

Shift warning light

F01772-01

The shift warning light is integrated in the tachometer display.
In the

Shift Light

menu, the engine speed for the shift warning

light can be set. The shift warning light is always active during the
running-in phase (up to 1,000 km / 621 mi). The shift warning
light can only be deactivated, and the values for

RPM1

and

RPM2

can only be adjusted after this. In

RPM1

the shift warning light

flashes and in

RPM2

it flashes and the color changes.

Info

In sixth gear, the shift warning light is deactivated when
the engine is warm after the first service.

Coolant temperature

≤

35 °C (

≤

95 °F)

ODO

< 1,000 km (< 620 mi)

The shift warning
light always flashes
at

6,500 rpm

Coolant temperature

> 35 °C (> 95 °F)

ODO

> 1,000 km (> 620 mi)

RPM1

shift warning

light

flashes

RPM2

shift warning

light

flashes and changes color

Summary of Contents for F4303U1



































































































































Search results

Summary of Contents for F4303U1

Reviews:

Related manuals for F4303U1

Brands by name

Popular brands

KTM F4303U1, Owner'S Manual

Search results

Summary of Contents for F4303U1

Reviews:

Related manuals for F4303U1

Brands by name

Popular brands