KTM 990 SUPERMOTO R AUS/UK Page 153 Owner'S Manual Download

Page: 153 / 218

COOLING SYSTEM

151

Alternative 2

Coolant (mixed ready to use) (

p. 202)

» If there is no coolant in the compensating tank:

–

Check the cooling system for leaks.

Info

Do not start up the motorcycle!

–

Fill/bleed the cooling system.

(

p. 154)

–

Mount cover

of the compensating tank.

C00353-10

–

Check the coolant level in the radiator.

The radiator must be completely filled.

» If the coolant level does not meet specifications:

–

Correct the coolant level and determine the reason for the coolant loss.

Alternative 1

Coolant (

p. 202)

Alternative 2

Coolant (mixed ready to use) (

p. 202)

» If more coolant needed to be added than the specified value:

> 0.50 l (> 0.53 qt.)

–

Fill/bleed the cooling system.

(

p. 154)

–

Mount radiator cap

Summary of Contents for 990 SUPERMOTO R AUS/UK



























































































































































































































Search results

Summary of Contents for 990 SUPERMOTO R AUS/UK

Reviews:

Related manuals for 990 SUPERMOTO R AUS/UK

Brands by name

Popular brands

KTM 990 SUPERMOTO R AUS/UK, Owner'S Manual

Search results

Summary of Contents for 990 SUPERMOTO R AUS/UK

Reviews:

Related manuals for 990 SUPERMOTO R AUS/UK

Brands by name

Popular brands