KTM 990 SUPERMOTO R AUS/UK, Owner'S Manual

Page: 133 / 218

14 ELECTRICAL SYSTEM
131
14.9 Changing the turn signal bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
C00357-10
–
Remove the screw on the rear of the turn signal housing.
–
Carefully remove diffuser
1
.
–
Press bulb
2
carefully into the socket, turn it counterclockwise by about 30°, and pull
it out of the socket.
–
Press the new bulb carefully into the socket and turn it clockwise until it stops.
Turn signal (RY10W/socket BAU15s) ( p. 195)
–
Check the turn signal to make sure it is functioning properly.
–
Position the diffuser.
–
Insert the screw and first turn it counterclockwise until it engages in the thread. Tighten
the screw slightly.
14.10 Changing the brake light bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Preparatory work
–
Remove the seat. ( p. 77)