TECHNICAL SPECIFICATIONS – ENGINE
»
ENGINE
990 LC8
Design
Liquid-cooled, 2-cylinder 4-stroke engine with 75° V arrangement with balancer shaft and electric starter
Displacement
999 cc
Bore / Stroke
101/62.4 mm
Compression ratio
11.5:1
Fuel
unleaded fuel with at least RON 95 (USA: Premium PON 91*) / RON 80 - 94 for other ignition curve)
Valve timing
4 valves controlled over bucket tappet and 2 camshafts, camshaft drive with gears/chain
Valve diameter
Intake: 38 mm Exhaust: 33 mm
Valve clearance, cold
Intake: 0.10 - 0.15 mm Exhaust: 0.25 - 0.30 mm
Crankcase bearing
Friction bearings (2 main bearings / 1 supporting bearing)
Conrod bearing
Friction bearing
Piston pin bearing
Dual-fuel bearing
Piston
Light alloy – forged
Piston rings
1 compression ring, 1 taper face ring, 1 single-piece oil scraper ring with spiral-type expander
Engine lubrication
Dry sump with 2 trochoidal pumps (pressure pump and suction pump)
Engine oil
SAE 10W-50 ( Motorex Power Synt 4T) #
Quantity of engine oil
approx. 3.0 liters during oil/filter change
Primary drive
Straight-toothed spur wheels 35 : 67
Clutch
Multi-disc clutch in oil bath
Transmission
6-speed claw shifted
Gear ratio
1st gear 12:35
2nd gear 15:32
3rd gear 18:30
4th gear 20:27
5th gear 24:27
6th gear 26:27
94
