MAINTENANCE WORK ON CHASSIS AND ENGINE
»
81
Add 2.5 liters (0.7 USgal) of fully synthetic engine oil meeting the JASO MA standard (e.g.
Motorex Power Synt 4T) and mount the oil dipstick. Start the engine, allow to run warm for
4 minutes and switch off the engine. Remove the oil dipstick and add engine oil up to the
MAX mark (approx. 0.5 liters, 0.13 USgal).
Check the engine and the oil tank for oil leakage.
Apply Loctite 243 to the thread of the 4 screws, mount the underride protection and tighten
the screws to 25 Nm.
The screws on the underride protection must be secured with loctite 243 to prevent them
from becoming loose.
Connect the turn signal cable and the tank vent hose and mount the left panel. Mount the
storage compartment cover.
