KTM 990 Adventure AUS, Owner'S Manual, Page: 117 / 218

WHEELS, TIRES
115
–
Holding the rear wheel, withdraw the wheel spindle. Take the rear wheel out of the
swing arm.
Info
Do not operate the foot brake when the rear wheel is removed.
–
Remove the spacer

.
12.4
Installing the rear wheel
x
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents
No braking effect when operating the rear brake.
–
After installing the rear wheel, always operate the foot brake until the pressure point is reached.
–
Check the rear hub rubber dampers. x ( p. 117)
100571-10
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the wheel bearing. x
–
Clean and grease shaft seal ring

and bearing surface

of the spacer.
Long-life grease ( p. 208)
–
Clean and grease the thread of the wheel spindle and nut.
Long-life grease ( p. 208)