KTM 950 Adventure 2005, Owner'S Manual

Page: 41 / 62

ENGLISH
40
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
Changing the engine oil and the oil filter, cleaning the oil screen *
NOTE: The LC8 engine has a dry-sump lubrication system. The engine oil is
pumped from the oil sump in the engine case to the oil tank. The engine oil
must also be drained from the oil tank during an oil change. Since many parts
must be demounted for an oil change, we recommend having the engine oil
changed by an authorized KTM workshop.
During the guaranty period, the oil change must be performed by an author-
ized KTM mechanic. Otherwise, the guarantee will become void.
The engine oil change is to be carried out when the engine is still warm.
AN ENGINE HAVING BEEN RUN WARM, AND THE ENGINE OIL IN IT IS VERY
HOT – DO NOT BURN YOURSELF.
Place the motorcycle on a level surface. Remove the 4 screws, take off the
underride protection and place a receptacle for the used oil under the engine.
Remove the oil drain plug [1] , take off the cap [2] and pull the oil sieve out
of the engine case with a pair of pliers.
Remove the oil filter cover [3] and pull the oil filter out of the engine case
with circlip pliers (upside-down).
Remove the 6 screws and the cover [4] .
Remove the 5 screws, take off the left panel [5] and disconnect the turn
signal cable.
Close all 3 fuel taps and the disconnect the fuel lines [6] from the left tank.
6
6
5
4
3
1
2