KTM 790 DUKE 2018, Setup Instructions

Page: 8 / 19

2 SETUP
6
V01344-10
–
Position grab handle and mount and tighten screws
bp
.
Guideline
Screw, grab
handle M8x50 25 Nm (18.4 lbf ft)
Loctite ® 243™
–
Remove the protective film.
–
Carefully loosen and remove the rear tension belt.
Info
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tension belts around the fork
legs.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the pallet.
–
Remove the passenger seat. ( p. 7)
–
Remove the spare key and KEYCODECARD keep in a safe place
for the handover.
Warning
Risk of injury Battery acid and battery gases cause
serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and safety
glasses.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks or open flames away from the battery.
–
Only charge batteries in well-ventilated rooms.
–
Rinse the affected area immediately with plenty of
water in the event of contact with the skin.
–
Rinse eyes with water for at least 15 minutes and
consult a doctor immediately if battery acid and
battery gases get into the eyes.
–
Fill the battery.
Info
Read the notes in the battery package.
–
Recharge the battery. ( p. 7)
–
Stow the tool set between the battery and the front rider's seat.
–
Mount the passenger seat. ( p. 7)
–
Refuel. ( p. 9)
–
Check the headlight setting. ( p. 12)
–
Adjust the time and date.
–
Set kilometers or miles.
–
Prepare the vehicle according to the specifications in the
KTM Dealer.net
for handover to the customer.