KTM 790 DUKE 2018, Setup Instructions

Page: 6 / 19

2 SETUP
4
–
Position the handlebar clamps. Mount and tighten the screws
evenly.
Guideline
Screw, handlebar
clamp M8 20 Nm (14.8 lbf ft)
Info
Keep the installed gap widths equal when tightening.
V01338-10
–
Align the controls of the left handlebar half with the markings
on the handlebar. Tighten the screws.
Guideline
Screw, combination
switch, left M5 2 Nm (1.5 lbf ft)
–
Position clutch assembly on the handlebar.
–
Position the clutch assembly clamp on the handlebar.
–
Mount and tighten screws
4
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
V01339-10
–
Align the control of the right handlebar half with the markings
on the handlebar. Tighten the screws.
Guideline
Screw, throttle grip M5 3.5 Nm
(2.58 lbf ft)
Screw, combination
switch, right M5 5 Nm (3.7 lbf ft)
–
Check the throttle grip for smooth operation.
–
Position brake assembly on the handlebar.
–
Position brake assembly clamp on the handlebar.
Clamp catch engages in the combination switch.
–
Mount and tighten screws
5
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Tie the cables together with the rubber bands supplied.
V01340-01
–
Mount and tighten the rear mirror on both sides.