KTM 690 Enduro R AUS, Owner'S Manual

Page: 118 / 190

ELECTRICAL SYSTEM
116
13.2
Installing the battery
x
100277-11
–
Slide the battery into the battery rack.
Info
The battery terminals must be at the rear.
–
Attach the positive cable and mount positive terminal cover

.
–
Position retaining bracket

.
–
Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Plug in connector

.
–
Attach the minus cable .
–
Mount the seat. ( p. 71)
–
Set the clock. ( p. 27)
13.3
Recharging the battery
x
Warning
Risk of injury Battery acid and battery gases cause serious cauterization.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep the battery away from sparks or open fire. Charge only in well ventilated rooms.
–
Flush with copious amounts of water in case of skin contact. If battery acid comes into contact with the eyes, flush the eyes
with water for at least 15 minutes and consult a physician.