KTM 690 Enduro R AUS, Owner'S Manual, Page: 73 / 190

SERVICE WORK ON THE CHASSIS
71
10.10
Mounting the seat
800096-10
–
Hook slot

of the seat onto screw

, press the rear downward and at the same time
push it forward.
–
Push locking pin

into lock housing

and push the back of the seat down until the
locking pin locks in place with an audible click.
–
Finally, check that the seat is correctly mounted.
10.11
Removing the air filter
x
–
Remove the seat. ( p. 70)
100285-10
–
Remove screws

. Remove filter box top

.