KTM 690 Enduro R AUS, Owner'S Manual, Page: 90 / 190

BRAKES
88
Info
Turn the adjusting screw clockwise to reduce free travel. The pressure point
moves away from the handlebar.
Turn the adjusting screw counterclockwise to increase free travel. The pressure
point moves towards the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make adjustments while riding.
11.3
Checking the brake discs
Warning
Danger of accidents Reduced braking efficiency due to worn brake disc(s).
–
Change the worn brake disc(s) without delay. (Your authorized KTM workshop will be glad to help.)
400406-10
–
Check the thickness of the front and rear brake discs in several places to ensure that it
conforms to measurement

.
Info
Wear reduces the thickness of the brake disc at the contact surface

of the
brake disc.
Brake discs - wear limit
Front 4.5 mm (0.177 in)
Rear 3.5 mm (0.138 in)
» If the brake disc thickness is less than the specified value:
–
Replace the brake disc.