KTM 690 Enduro R AUS/UK 2012, Repair Manual

Page: 155 / 234

17 ENGINE
153
302121-10
–
Position a new lock washer and install the nut
5
.
–
Lock the clutch basket and primary gear using special tool and tighten the nut.
Guideline
Nut, inner clutch hub M20x1.5 100 Nm
(73.8 lbf ft)
Loctite
®
243™
Gear segment (75029081000) ( p. 221)
Info
Make sure that the crankshaft is not blocked.
–
Secure the nut with the lock washer
6
.
302122-10
–
Lock the clutch basket and primary gear using the special tool.
Gear segment (75029081000) ( p. 221)
–
Mount and tighten the nut
7
.
Guideline
Nut, primary gear M20LHx1.5 90 Nm
(66.4 lbf ft)
Loctite
®
243™
300061-10
–
Insert the pressure piece
8
.
300052-11
–
Place the pressure cap on.
–
Install and tighten the screws
9
with the spring retainers and clutch springs.
Guideline
Screw, clutch spring M5 6 Nm (4.4 lbf ft)
Info
Ensure that all clutch springs have a blue color coding.
–
Remove the special tool.
17.5.11 Installing crankshaft position sensor
300151-10
–
Position the crankshaft position sensor
1
.
–
Mount screws but do not tighten them yet.
Guideline
Screw, ignition pulse gen-
erator M6 10 Nm
(7.4 lbf ft) Loctite ® 243™
–
Position the cable and push the cable support sleeve
2
into the engine case.