17
ENGINE
117
17.3.22 Removing crankshaft position sensor
300151-10
–
Remove the screws of crankshaft position sensor
1
.
–
Pull cable support sleeve
2
out of the engine case. Take off the crankshaft posi-
tion sensor.
17.3.23 Removing clutch cage
300051-10
–
Clamp the antihopping clutch with special tool
1
.
Assembly screws (75029033000) (
Info
Apply the special tool with the hand only, do not use another tool.
300052-10
–
Loosen the screws
2
diagonally and remove them with their spring retainers and
clutch springs.
–
Remove the pressure cap
3
.
300053-10
–
Remove the pressure piece
4
.
–
Bend up the lock washer
5
.
300054-10
–
Hold the clutch cage using the special tool and remove the nut
6
of the inner
clutch hub.
Gear segment (75029081000) (
Info
Make sure that the crankshaft is not blocked.
–
Remove the nut
7
of the primary gear.
Info
Left-handed thread!
