17
ENGINE
152
300064-11
–
Push on the starter idler gear
4
with washer. Mount lock ring.
–
Push on the needle bearing and torque limiter
5
with washer. Mount lock ring.
17.5.9
Installing primary gear
300063-10
–
Ensure that the spring washer is seated properly.
–
Mount primary gear
1
.
Info
Turn freewheel gear backwards and forwards to ease meshing.
17.5.10 clutch cage, installing
300057-10
–
Install supporting plate
1
and needle bearing
2
.
300058-10
–
Install the clutch cage
3
.
Info
Turn the clutch basket and oil pump gear wheels backwards and forwards
slightly to help them mesh more easily.
–
Mount the half washers with the sharp edge facing outward.
Info
Grease the half washers to ease assembly.
–
Position stepped washer with the recesses toward the half washers.
302123-10
–
Insert the clutch package
4
in the clutch cage.
Info
If necessary, turn the main shaft a little to ease access.
Make sure that the upper clutch facing disc is offset by one notch.
