KTM 690 ENDURO AUS/UK 2008, Owner'S Manual

Page: 98 / 179

MAINTENANCE WORK ON CHASSIS AND ENGINE
96
9.43
Fitting rear wheel
x
Warning
Danger of accidents Reduced braking due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
–
After installing the rear wheel, always operate the footbrake until the pressure point is reached.
–
Checking the rear hub rubber dampers. x ( P. 97)
100269-10
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Remove the bushing

. Clean and grease the roll surfaces of the bushing and the shaft
seal ring

.
Long-life grease ( P. 170)
–
Clean and grease the thread of the wheel spindle and nut

.
Long-life grease ( P. 170)
–
Mount the rubber damper and rear sprocket carrier in the rear wheel.
–
Place the rear wheel in the swingarm and bring the brake disc on the brake caliper into
contact.