KTM 690 ENDURO AUS/UK 2008, Owner'S Manual

Page: 137 / 179

MAINTENANCE WORK ON CHASSIS AND ENGINE
135
100201-01
–
Thoroughly clean the oil drain plug with a magnet.
–
Check parts for damage and wear. Replace damaged or worn parts.
–
Refit the oil drain plug with the magnet and seal ring and tighten it.
Specification
Oil drain plug with magnet M12x1,5 20 Nm (14.8 lbf ft)
9.79
Removing the oil filter
x
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
–
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
–
Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
–
Place a suitable container under the engine.