KTM 690 Duke CN 2016, Setup Instructions

Page: 6 / 15

2 SETUP
4
201899-10
–
Mount and tighten the rear mirror adapter and rear mirror on both sides.
H00385-01
–
Mount the footrests with the springs and pins. Secure the pins with the lock rings.
Pliers for footrest spring (58429083000)
201901-10
–
Mount the reflector.
–
Remove the protective plastic.
–
Carefully loosen and remove the tensioning belt over the swingarm.
Info
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tension belts around the lower triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the palette.
Warning
Risk of injury
Battery acid and battery gases cause serious chemical burns.
–
Keep batteries out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
Avoid contact with battery acid and battery gases.
–
Keep sparks and open flames away from the battery. Only charge in
well-ventilated rooms.
–
In the event of skin contact, rinse with large amounts of water. If battery
acid gets in the eyes, rinse with water for at least 15 minutes and con-
tact a physician.
–
Fill the battery.
Info
Read the notes in the battery package.
–
Recharge the battery. ( p. 5)
–
Install the battery. ( p. 6)
–
Refuel. ( p. 7)
–
Prepare the vehicle according to the specifications in the KTM Dealer.net for han-
dover to the customer.
–
Set the kilometers or miles. ( p. 7)