MAINTENANCE WORK ON CHASSIS AND ENGINE
110
100160-10
–
Remove the screw from the rear of the flasher housing.
–
Tilt headlamp diffuser
forward carefully and take it off.
–
Press the flasher bulb carefully into the socket, turn it counterclockwise by about 30°,
and take it out of the socket.
Info
Do not touch the reflector with your fingers, and keep it free from grease.
–
Press the new flasher bulb carefully into the socket and turn it clockwise until it stops.
Flasher light (BAU15s) (
p. 153)
–
Position the diffuser.
–
Insert the screw and turn it counterclockwise first until it engages in the thread. Tighten
the screw slightly.
–
Check the flasher system function.
9.51
Checking the low beam headlight adjustment
B
A
100159-10
–
On a light-colored wall behind a horizontal area, make a mark as high as the center of
the low beam headlight.
–
Make another mark at a distance of
under the first mark.
Guideline
Distance
5 cm (2 in)
–
Stand the motorcycle at a distance of
in front of the wall and switch on the ignition.
Guideline
Distance
5 m (16 ft)