MAINTENANCE WORK ON CHASSIS AND ENGINE
109
–
Remove the headlight mask with the headlight. (
p. 100)
700175-01
–
Set down the headlight mask in front of you as shown in the illustration and carefully
tilt the high beam headlight in the direction of the low beam headlight.
–
Turn the bulb holder
about 30° counterclockwise and remove it.
700176-01
–
Pull the parking light bulb out of the holder.
–
Insert a new parking light bulb in the holder.
Parking light (W2.1x9.5d) (
p. 153)
–
Position the bulb holder and turn it clockwise as far as it will go.
–
Install the headlight mask with the headlight. (
p. 102)
9.50
Changing the flasher bulb
Note
Damage to reflector
Keep the glass of the bulb free of grease.
–
Clean the glass bulb with a clean cloth before mounting. Any grease on the glass will evaporate due to the heat and be deposited on
the reflector.