11
SERVICE WORK ON THE CHASSIS
32
11.10
Installing the lower triple clamp
602666-10
Main work
–
Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
–
Check whether the upper steering head seal
is correctly positioned.
–
Push on protective ring
.
H00152-10
–
Position the upper triple clamp with the handlebar.
–
Mount nut
, but do not tighten it yet.
H00153-10
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the upper edge of
the upper triple clamp.
Position bleeder screws
toward the front.
H00135-10
–
Tighten screws
.
Guideline
Screw, bottom triple clamp
M8
15 Nm
(11.1 lbf ft)
H00154-10
–
Tighten nut
.
Guideline
Nut, steering stem
M20x1.5
10 Nm (7.4 lbf ft)
Summary of Contents for 65 SX 1999
Page 1: ...OWNER S MANUAL 2016 65 SX Art no 3213328en...
Page 2: ......
