11
SERVICE WORK ON THE CHASSIS
30
H00163-11
–
Position the fork protector on the left fork leg. Mount and tighten screws
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
–
Position the brake line. Mount clamp
.
–
Mount screws
.
11.7
Removing the fork legs
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
K00208-10
Main work
–
Remove screws
and take off the clamp.
–
Remove screws
and take off the brake caliper.
–
Hang the brake caliper and the brake line loosely to the side.
S00870-10
–
Loosen screws
. Remove the left fork leg.
–
Loosen screws
. Remove the right fork leg.
11.8
Installing the fork legs
Warning
Danger of accidents
Modifications to the suspension settings can seriously alter the vehicle's ride behavior.
–
Following modifications, ride slowly at first to get the feel of the new ride behavior.
K00205-10
Main work
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
to the front.
S00870-11
–
Tighten screws
.
Guideline
Screw, top triple clamp
M8
20 Nm
(14.8 lbf ft)
–
Tighten screws
.
Guideline
Screw, bottom triple clamp
M8
15 Nm
(11.1 lbf ft)
Summary of Contents for 65 SX 1999
Page 1: ...OWNER S MANUAL 2016 65 SX Art no 3213328en...
Page 2: ......
