ENGLISH
4
5
10
4
Cut-out areas
Rear view
-
Fasten the rear crossbar
9
to the two insertion angles
bk
, using the
two M8x16 flat head screws with hexagon socket
bl
- do not tighten
yet.
-
Fasten the top case supporting plate
1
using the four M8x20 flat head
screws with hexagon socket
2
and the four M8 nuts
3
.
-
Now you can align the top case supporting plate by tightening the four
flat head screws
2
. Afterwards, tighten all of the retaining screws that
are still loose.
-
Finally, fasten the lower rear with the previously loosened M6x10
screws (Fig. A); mount the two silencers, rear fender and seat.
Warning: Check all connections for a tight fit after driving 50 km.
The max. payload is limited to 12 kg.
Suitable top cases:
Top case 37, KTM no.: 60012027200
Top case 46, KTM no.: 60012027300
2
1
5
3
6
8
7
9
3
11
4
10
- Slide the two insertion angles
bk
in the left and right rear frame
tube.
NOTE: the cut-out areas on the insertion angles must face the center of
the vehicle.