11
SERVICE WORK ON THE CHASSIS
40
B01422-10
(XC
‑
F)
–
Position the fork legs.
Position bleeder screws
5
toward the front.
Info
The rebound damping is located in the right fork leg (red adjusting
screw). The compression damping is located in the left fork leg (white
adjusting screw).
Grooves are milled into the side of the upper end of the fork legs. The
second milled groove (from the top) must be flush with the top edge of
the upper triple clamp.
B01466-10
–
Tighten screws
6
.
Guideline
Screw, bottom triple clamp
M8
12 Nm (8.9 lbf ft)
B01467-10
–
Tighten screw
4
.
Guideline
Screw, top steering head
M20x1.5
12 Nm (8.9 lbf ft)
B01467-11
–
Mount and tighten screw
7
.
Guideline
Screw, top steering stem
M8
17 Nm
(12.5 lbf ft)
Loctite
®
243™
B01466-11
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
–
Tighten screws
8
.
Guideline
Screw, top triple clamp
M8
17 Nm
(12.5 lbf ft)
B00379-10
–
Position the brake caliper. Mount and tighten screws
9
.
Guideline
Screw, front brake caliper
M8
25 Nm
(18.4 lbf ft)
Loctite
®
243™
–
Position the brake line and clamp. Mount and tighten screws
bk
.
Finishing work
–
Install the front fender. (
