KTM 350 EXC-F AUS 2014, Setup Instructions

Page: 7 / 24

2 SETUP
5
C00522-10
(XCF
‑
W)
–
Insert the indicator lamp with the orange and brown cable colors into
socket
7
.
–
Insert indicator lamp LED with the black and black cable colors into
socket
8
.
–
Connect pull switch
9
with the yellow and white cables.
C00539-10
(EXC-F SIX DAYS)
–
Insert the indicator lamp with the black and violet cable colors into
socket
bk
.
C00540-10
(XCF-W SIX DAYS)
–
Connect pull switch
bl
with the yellow and white cables.
–
Position the speedometer and connector board. Mount and tighten screws.
Guideline
Remaining screws, chassis M6 10 Nm
(7.4 lbf ft)
C00523-10
–
Position the controls on the right half of the handlebar.
Info
The routing of the cables can be seen in the figure.
C00524-10
–
Position the controls on the left half of the handlebar.
Info
The figure shows how to route the clutch line and wiring harness.
B01749-01
(All EXC
‑
F models)
–
Remove the fuel tank.
–
Position the turn signal wiring harness against the main wiring harness and
secure with cable binders.