3
WORK
16
400330-01
–
Press the button
briefly and repeatedly until
CLK
appears at the bottom right of
the display.
–
Press the button
for 3 - 5 seconds.
The hour display flashes.
–
Set the hour display with the button
and/or button .
–
Press the button
briefly.
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
the button
and the button .
Info
The seconds can only be set to zero.
–
Press the button
for 3 - 5 seconds.
The settings are stored and the Setup menu is closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu is closed.
3.18
All SIXDAYS models
3.18.1
Setting kilometers or miles
Info
If you change the unit, the value
ODO
is retained and converted accordingly.
The values
TR1
,
TR2
,
A1
,
A2
and
S1
are cleared when the unit of measure is changed.
Condition
The motorcycle is stationary.
400329-01
–
Repeatedly press the button
briefly until
H
appears at the bottom right of the
display.
–
Press the button
for 2
–
3 seconds.
The Setup menu is displayed and the active functions are shown.
–
Repeatedly press the button
briefly until
Km/h
/
Mph
flashes.
Setting the Km/h
–
Press the button .
Setting the Mph
–
Press the button .
–
Wait 3
–
5 seconds
The settings are stored.
Info
If no button is actuated for 10
–
12 seconds or there is no signal from the
wheel speed sensor, then the settings are automatically stored and the
Setup menu is closed.
3.18.2
Setting the speedometer functions
Info
When the vehicle is delivered, only the
SPEED/H
and
SPEED/ODO
display modes are activated.
Condition
The motorcycle is stationary.
Summary of Contents for 350 EXC-F AUS 2014
Page 2: ......
