12
SERVICE WORK ON THE CHASSIS
55
K00089-10
(EXC
‑
F EU/AU/BR)
–
Position the upper triple clamp with the handlebar.
–
Mount screw
but do not tighten yet.
–
Position the clutch line, wiring harness, and voltage regulator. Mount and
tighten screws
.
Guideline
Remaining screws, chassis
M6
10 Nm
(7.4 lbf ft)
K00087-11
–
Position the fork legs.
Bleeder screws
are positioned toward the front.
Info
Grooves are milled into the side of the upper end of the fork legs. The
second milled groove (from the top) must be flush with the top edge of
the upper triple clamp.
K00090-10
–
Tighten screws
.
Guideline
Screw, bottom triple clamp
M8
15 Nm
(11.1 lbf ft)
K00091-10
–
Tighten screw
.
Guideline
Screw, top steering head
M20x1.5
12 Nm
(8.9 lbf ft)
K00092-10
–
Mount and tighten screw
.
Guideline
Screw, top steering stem
M8
17 Nm
(12.5 lbf ft)
Loctite
®
243™
K00090-11
–
Tighten screws
.
Guideline
Screw, top triple clamp
M8
17 Nm
(12.5 lbf ft)
–
Secure the wiring harness with cable holder
.
Summary of Contents for 250 EXC-F EU 2010
Page 2: ......
