CONTROLS
83
5.52
Setting the fuel reserve display TRIPF RESET
Condition
The ignition is on.
The motorcycle is stationary.
400463-01
–
Press the button
and the button
for 3 - 5 seconds.
–
Press the button
twice until the symbol
appears in front of
SETTINGS
in the info
display.
–
Press the
MODE
button briefly.
–
Press the button
three times until the symbol
shows
TRIP F RESET
in the info dis-
play.
–
Press the
MODE
button briefly.
TRIPF RESET
appears in the info display with the reaction time.
Info
At delivery,
TRIPF RESET
is set to 300 seconds.
–
Set the reaction time of the fuel reserve display with the
button or the
button.
Info
You can set the
TRIPF RESET
to between 10 and 1000 seconds in steps of 10.
–
Press the
MODE
button briefly.
The settings are stored and the display changes to the
SETTINGS
menu.
–
Press the button
briefly and repeatedly until the symbol
shows
BACK...
in the info
display.
–
Press the
MODE
button briefly.
–
Press the button
briefly and repeatedly until the symbol
shows
EXIT SETUP
in the
info display.
Summary of Contents for 2010 1190 RC8
