
SERVICE SCHEDULE (EXC
‑
F, EXC
‑
F SIX DAYS, XCF-W)
32
10
SERVICE SCHEDULE (EXC‑F, EXC‑F SIX DAYS, XCF-W)
10.1
Important maintenance work to be carried out by an authorized KTM workshop.
S3N
S20A
S30A
Engine
Change the engine oil and oil filter, clean the oil screen.
•
•
Replace the spark plug.
•
Check the valve clearance.
x
•
•
Check the engine mounting screws for tightness.
•
•
Clean the spark plug connectors and check for tightness.
•
•
Check that the screws in the shift lever and the kickstarter are tight.
•
•
Carburetor
Check the carburetor connection boots for cracks and leakage.
•
Check the vent hoses for damage and routing without sharp bends.
•
•
Check the idle.
•
•
Attachments
Check the cooling system for leakage.
•
•
Check the antifreeze and coolant level. (
•
•
Check the exhaust system for leakage and looseness.
•
Check the Bowden cables for damage, smooth operation and routing without sharp
bends.
•
•
Check the fluid level of the hydraulic clutch. (
•
•
Clean the air filter.
x
•
•
Check the cables for damage and routing without sharp bends.
•
Check the functioning of the electrical equipment.
•
•
Check the headlamp setting.
•
Brakes
Check the front brake linings. (
•
•
Check the rear brake linings. (
•
•
Check the brake discs. (
•
•
Check the front brake fluid level. (
•
•
Check the rear brake fluid level. (
•
•
Check the brake lines for damage and leakage.
•
•
Check the free travel of the hand brake lever. (
•
•
Check the free travel of the foot brake lever. (
•
•
Check the brake system function.
•
•
Check the screws and guide bolts of the rake system for tightness.
•
•
Chassis
Check the shock absorber and fork for leakage and functioning.
x
•
•
Clean dust boots of fork legs. (
•
Bleed fork legs. (
•
Check the swingarm bearing.
•
Check play of steering head bearing. (
•
•
Check all screws to see if they are tight.
•
•
Wheels
Check the spoke tension. (
•
•
Check the rim run-out.
•
•
Check the tire condition. (
•
•
Check the tire air pressure. (
•
•
Check the chain wear. (
•
•
Check the chain tension. (
•
•
Clean the chain. (
•
•
Check the wheel bearing for play.
•
•
Clean and grease the adjusting screws of the chain adjuster.
•
•
S3N:
After 3 service hours
S20A:
Every 20 service hours
S30A:
Every 30 service hours
Summary of Contents for 2009 250 EXC-F SIX DAYS
Page 2: ......
Page 110: ...WIRING DIAGRAM 108 ye re Yellow red ...
Page 111: ...WIRING DIAGRAM 109 ...