KTM 200 DUKE 2021, Owner'S Manual

Page: 53 / 119

SERVICE WORK ON THE CHASSIS 12
51
E01190-10
Main work
–
Push protection caps
1
of both fork legs downward.
–
Push dust boots
2
of both fork legs downward.
Info
The dust boots remove dust and coarse dirt particles
from the inside fork tubes. Over time, dirt can accumu-
late behind the dust boots. If this dirt is not removed,
the oil seals behind can start to leak.
Warning
Danger of accidents Oil or grease on the brake discs
reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when nec-
essary.
–
Clean and oil the dust boots and inner fork tubes of both fork
legs.
Universal oil spray ( p. 109)
–
Press dust boots
2
of both fork legs back into the installation
position.
–
Remove the excess oil.
–
Push protection caps
1
of both fork legs upward.
Finishing work
–
Take the motorcycle off the front lifting gear. ( p. 50)
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 49)
12.6 Removing the passenger seat
H01991-10
–
Insert the ignition key in seat lock
1
and turn it clockwise.
–
Raise the rear of the seat, push it towards the rear, and lift it
off.
–
Remove the ignition key from the seat lock.