KTM 1290 Super Duke R 2019, Setup Instructions, Page: 39 / 46

TECHNICAL DATA 4
37
Screw, chain sliding guard M5 5 Nm (3.7 lbf ft)
Screw, combination instrument M5 3.5 Nm (2.58 lbf ft)
Screw, combination switch, right M5 5 Nm (3.7 lbf ft)
Screw, front turn signal bracket M5 3 Nm (2.2 lbf ft)
Screw, fuel level sensor M5 3 Nm (2.2 lbf ft)
Screw, fuel tank filler cap M5 3 Nm (2.2 lbf ft)
Screw, rear turn signal bracket M5 3 Nm (2.2 lbf ft)
Screw, shock absorber adjusting
ring M5 5 Nm (3.7 lbf ft)
Screw, trim M5x12 3.5 Nm (2.58 lbf ft)
Cable disk nut, exhaust valve con-
trol unit M6 14 Nm (10.3 lbf ft)
Ground fitting on frame M6 10 Nm (7.4 lbf ft)
Nut, cable on starter motor M6 4 Nm (3 lbf ft)
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, ABS module fastening M6 5 Nm (3.7 lbf ft)
Screw, angle sensor cover M6 6 Nm (4.4 lbf ft)
Loctite ® 243™
Screw, ball joint of push rod on
foot brake cylinder M6 5 Nm (3.7 lbf ft)
Loctite ® 243™
Screw, battery terminal M6 4.5 Nm (3.32 lbf ft)