2
SETUP
4
–
Check the throttle grip for smooth operation.
M00792-01
–
Mount and tighten the rear mirror on both sides.
V00130-10
–
Mount reflector
1
with spring washers
2
on holding plate
3
.
–
Mount the holding plate on the license plate bracket.
–
Mount the license plate holder.
–
Carefully loosen and remove the tension belt over the swingarm.
Guideline
An assistant prevents the motorcycle from falling over.
–
Carefully loosen and remove the tensioning belts around the lower triple clamp.
The vehicle is released at the front.
–
Together with an assistant, take the vehicle off the palette.
–
Loosen the mask spoiler. (
V00134-10
–
Remove screws
4
.
M00748-10
–
Swing the headlight toward the front.
–
Disconnect plug-in connector
5
.
–
Put down the headlight on a soft cloth.
M00794-10
–
Position headlight mask
6
.
The screw connection points
C
are correctly aligned to the headlight.
The holder
7
locks onto the headlight.