KTM 1290 SUPER ADVENTURE R 2017, Owner'S Manual

Page: 149 / 274

13 SERVICE WORK ON THE CHASSIS
147
K00820-10
–
Check the chain sliding guard for wear at the recess.
Info
When the chain sliding guard is new, the rivets
1
are half visible at the bottom
edge
C
of the recess.
» When the rivets of the chain are no longer visible at the bottom edge of the recess
of the chain sliding guard:
–
Change the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the screws on the chain sliding guard.
Guideline
Screw, chain sliding guard M5 5 Nm (3.7 lbf ft)
401670-01
–
Check the chain guide for wear.
» If the chain guide is worn:
–
Change the chain guide.
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Screw, chain guide M6 5 Nm (3.7 lbf ft)
Finishing work
–
Remove the vehicle from the center stand. ( p. 138)