ENGLISH
6
Combination switch
The rocker switch
1
actuates the high beam and low beam.
= High-beam
light
= Low-beam
light
The flasher switch
2
returns to central position after actuation. Press
flasher switch towards switch housing to switch off the flasher.
The horn is sounded with button
3
.
The light signal (high beam) is actuated with button
4
.
NOTE: The engine must be running in order to be able to check that all
current consumers are functioning correctly.
Starter tip switch, emergency OFF switch
Use the starter tip switch
5
to operate the electric starter.
WARNING
C
HECK BEFORE STARTING IF THE TRANSMISSION IS SET TO NEUTRAL
(I
NDICATOR LAMP
„N“
MUST BE ON
).
!
CAUTION
!
M
AXIMUM PERIOD FOR CONTINUOUS STARTING
: 5
SECONDS
. W
AIT AT LEAST
5
SECONDS BEFORE TRYING AGAIN
.
The emergency OFF switch
6
is mainly a safety and emergency switch and
should normally be ON.
When this symbol is concealed by the switch, the ignition circuit is
short-circuited. The engine is cranked by the electric starter, howe-
ver, it does not start.
When this symbol is concealed by the switch, the ignition circuit is
operative and the engine should start when cranked.
NOTE:
No locking of the electric starter via the neutral or emergency OFF func-
tions is provided.
Filler cap
To open filler cap: Turn the filler cap counter-clockwise.
To close filler cap: Screw on the filler cap clockwise. Place the tank venting
hose
7
in position, avoiding any kinks.
ignition circuit
short-circuited
engine does not start
ignition circuit
operative
engine can be start
1
4
1
2
3
5
6
7
Summary of Contents for 125 LC2 1998
Page 1: ...BEDIENUNGSANLEITUNG OWNER S HANDBOOK MANUEL D UTILISATION 125 LC2 98 ART NR 320531 2 98...
Page 2: ......
Page 31: ......