6
ENGLISH
Scope of supply
1x steering damper
1x clamp
3x collar screw M8x25
1x screw M8x35
Preliminary work
- Raise the motorcycle with a lift stand. (See repair manual)
- Remove front fender. (See owner’s manual)
- Strap the rear part down.
- Remove the front wheel (work stand). (See repair manual)
Removing the bottom triple clamp cover
- Remove screw
.
- Lower triple clamp cover
.
- Disconnect horn socket connectors
.
- Detach temperature sensor
.
- Take off triple clamp cover
.
Assembly
- Loosen screws
on the lower left triple clamp.
All work marked with this symbol requires specialist knowledge and technical understanding.
In the interests of your own safety, have these jobs performed by an authorized KTM workshop.
There, your motorcycle will be optimally cared for by specially trained experts using the auxiliary tool required.
