-29-
Subnet Mask
Set Subnet mask for IP address for the web management
Gateway
Set Default gateway IP address for the web management
Name
Set the system name for this device unit
Password
Set new password
SNMP Trap
SNMP trap function configuration
Disable
- the device is disable to send SNMP trap messages.
Enable
- the device is enable to send SNMP trap messages.
Community Name
Set community string to be bound with trap packets
Trap IP Address
Set IP address of the SNMP trap host
802.1Q Control
802.1Q Control function main configuration
Disable
- all packets are allowed to pass with no 802.1Q control.
Enable
- 802.1Q control mechanism is activated for the conversion.
Jumbo Mode
Enable / disable Jumbo mode to support jumbo packets
Disable
- support maximum packet size up to 1526 bytes
Enable
- support maximum packet size up to 9600 bytes
Link fault pass through
Enable / disable link fault pass through function
Remote TP auto report
Enable / disable remote TP port link status function
Power Saving Mode
Enable
- enable power saving all the time
Disable
- disable power saving
[Apply]
Click to apply the configuration change
[Refresh]
Click to refresh current configuration
Note:
It is suggested to give each device unit a system name as an alternative unique
identification beside IP address.
