2.5 Setting the Configuration Switches
The configuration switches (4 blocks) are located on the rear and illustrated as:
Figure 2-7 Configuration Switches
Each block consists of 6 DIP switches which are numbered 1 to 6 from left
to right sequentially. Every three consecutive DIP switches are grouped
and labeled with a port number individually as follows:
PORT#
SWITCHES
1
SW4-4, 5, 6
SW4 position 4, 5, 6
2
SW4-1, 2, 3
SW4 position 1, 2, 3
3
SW3-4, 5, 6
4
SW3-1, 2, 3
5
SW2-4, 5, 6
6
SW2-1, 2, 3
7
SW1-4, 5, 6
8
SW1-1, 2, 3
The functions of three DIP switches (from left to right) are:
SWITCH
SETTING & DEFINITION
SWx-1, -4
Off
Full-duplex operation (when manual setting)
On
Half-duplex operation (when manual setting)
SWx-2, -5
Off
100Mbps operation (when manual setting)
On
10Mbps operation (when manual setting)
SWx-3, -6
Off
Enable auto-negotiation function
On
Manual setting (auto-negotiation is disabled)
SWx : switch block x and x=1, 2, 3, 4
9
