Note:
1.
If DHCP fails and the configured IP address is zero, DHCP will retry. If DHCP fails and the configured IP
address is non-zero, DHCP will stop and the configured IP settings will be used. The DHCP client will
announce the configured System Name as hostname to provide DNS lookup.
2.
The IP addresses should be in dotted decimal notation.
3.3 IPv6 Configuration for Stack
Select [Configuration] -> [System] -> [IPv6 & Time] to configure IPv6 address
IPv6 Configuration web page
Configuration Description
Auto Configuration
Enable IPv6 auto-configuration by checking this box. If fails, the configured IPv6
address is zero. The router may delay responding to a router solicitation for a few
seconds, the total time needed to complete auto-configuration can be significantly
longer.
Address
Provide the IPv6 address of this switch. IPv6 address is in 128-bit records represented
as eight fields of up to four hexadecimal digits with a colon separates each field (:).
For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that can be
used as a shorthand way of representing multiple 16-bit groups of contiguous zeros;
-33-
