The following figure illustrates a connection example between two fiber ports:
Make sure the Rx-to-Tx connection rule is followed on the both ends of the fiber cable.
Network Cables
Multimode (MMF) - 50/125
μ
m, 62.5/125
μ
m
Single mode (SMF) - 9/125
μ
m
Fiber Port Configuration
For 1000M fiber application on Port 21, 22, 23, and 24, just leave the default port configuration
Auto
for fiber
connection.
2.9 Using Power over Ethernet
The PoE featured switch models can deliver PoE power via the UTP connection over all copper ports. They
require an external DC power input dedicated for PoE connections.
2.9.1 Applying PoE DC IN power
The PoE DC IN interface is shown below:
PoE DC power input specifications
Receptacle: Screw-type terminal block
IEEE 802.3af compliant (PoE) operating voltage Vpoe: +45 ~ +57VDC
IEEE 802.3at compliant (PoE+) operating voltage Vpoe: +51 ~ +57VDC
-19-