-13-
2. Installation
2.1 Unpacking
The product package contains:
The device unit for Din-rail mounting
QR code label linking to product documentation cloud
2.2 Safety Cautions
To reduce the risk of bodily injury, electrical shock, fire and damage to the product, observe the following
precautions.
Do not service any product except as explained in your system documentation.
Opening or removing covers may expose you to electrical shock.
Only a trained service technician should service components inside these compartments.
If any of the following conditions occur, unplug the product from the electrical outlet and replace the
part or contact your trained service provider:
-
The power cable, extension cable, or plug is damaged.
-
An object has fallen into the product.
-
The product has been exposed to water.
-
The product has been dropped or damaged.
-
The product does not operate correctly when you follow the operating instructions.
Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by
shorting out interior components.
Operate the product only from the type of external power source indicated on the electrical ratings
label. If you are not sure of the type of power source required, consult your service provider or local
power company.
Since the surface temperature of the device may be higher than 70
℃
in range of
the rated operating temperatures, install and operate the product only by authorized
personnel only. Install the product at a restricted area where un-authorized persons
cannot reach.
