manualshive.com logo in svg

KTI Networks KGD-600-B, Installation Manual

The KTI Networks KGD-600-B Installation Manual is now available for free download on our website. This comprehensive manual provides step-by-step instructions and guidelines on setting up and installing your KGD-600-B device. Don't miss the chance to enhance your user experience, visit manualshive.com and get your manual today!

Share
Download
background image

-60-

4.16 LACP Status

Status

Description

Port

The port number

Normal

Display the ports not LACP enabled.

Group #

The LACP group

Status

The LACP port status presented with color and a number
<

Down

> - the port is link down

<

Blocked & #

> - the port is blocked by RSTP and the # is the port

number of LACP link partner
<

Learning

> - the port is learning by RSTP

<

Forwarding

> - the port is link up and forwarding frames

<

Forwarding & #

> - the port is link up and forwarding frames and the # is

the port number of LACP link partner

Partner  MAC  address

The MAC address of the link partner at the other end of the LACP
aggregate

Local Port Aggregated

The ports at local end which are aggregated in same LACP group

[Refresh]

Click to refresh the status.

Note: the figure shows an example that two LACP link aggregates are configured.

Summary of Contents for KGD-600-B










































































Reviews:

No comments

Related manuals for KGD-600-B

Brands by name

Popular brands

Load more brands