-15-
Using DC Power Jack
When an external power system is not available, the switch provides a DC jack to receive power from
typical AC-DC power adapter alternatively.
AC Power Adapters:
Optional commercial rated adapters are available for purchase.
AC input power:
AC power voltage of your area, options -
Rated AC120V/60Hz DC7.5V 1A
Rated AC230V/50Hz DC7.5V 1A
Rated AC100V/50-60Hz DC7.5V 1A
Rated AC240V/50Hz DC7.5V 1A
Note: Before you begin the installation, check the AC voltage of your area. The AC power
adapter which is used to supply the DC power for the unit should have the AC voltage
matching the commercial power voltage in your area.
2.7 Reset Button
The reset button is used to perform a reset to the switch. It is not used in normal cases and can be used
for diagnostic purpose. If any network hanging problem is suspected, it is useful to push the button to
reset the switch without turning off the power. Check whether the network is recovered.
The button can also be used to restore the software configuration settings to factory default values.
The operations are:
Operation
Function
Press the button more than 5 seconds when power up
Restore all factory default settings
Press the button and release during switch operation
Reboot the switch
