manualshive.com logo in svg

KTI Networks KGD-600-B, Installation Manual

The KTI Networks KGD-600-B Installation Manual is now available for free download on our website. This comprehensive manual provides step-by-step instructions and guidelines on setting up and installing your KGD-600-B device. Don't miss the chance to enhance your user experience, visit manualshive.com and get your manual today!

Share
Download
background image

-55-

4.12.2 DSCP Mapping

Configuration

Description

DSCP [0-63]

Seven user-defined DSCP values which are configured with a priority class

0 ~ 63

 - 6-bit DSCP value in decimal

Priority

The priority class configured for the user-defined DSCP value

Class 3 ~ Class 0

All others

The other DSCP values not in the seven user-defined values are assigned a
default priority class

Class 3 ~ Class 0

[Apply]

Click to apply the configuration change

[Refresh]

Click to refresh current configuration

[Back]

Click to go back to upper menu

Only one DSCP mapping table is configured and applied to all ports. The table is referred in DSCP
priority classification.

Summary of Contents for KGD-600-B










































































Reviews:

No comments

Related manuals for KGD-600-B

Brands by name

Popular brands

Load more brands