<<Operations in the Measurement Mode>>
In this mode, you can control the torque by reading the
display without specifying any target value. It allows you to
tighten an object while checking the torque.
P button
Starting up
With nothing shown
on the display,
press the P button
to turn the power
ON. The display will
display " " and the
LED will light once
with a short buzzer
sound.
Lights once
NOTE
(1)
Power ON
: Turn ON the power for making measurements and settings.
If an error code
appears, troubleshoot it
referring to
8
.
After the power is turned ON,
the instrument enters the
Measurement mode.
Measurement mode display
(With no load applied)
NOTE
Be sure to not to apply any force to the instrument after turning
it ON until the display displays "0". If it is turned ON with some
force applied, it may not indicate the torque correctly.When you
use it in a place where it is exposed to sudden changes in
temperature, turn it OFF and ON frequently.
When the Pass/Fail mode
has been set,
see
5
-
①
.
1.
Blip