In this mode, you can preset target torques and use the
instrument accordingly.
You can customize the instrument to accommodate your
working conditions and practices.
Specify how the measured torque value is
displayed.
1
1
2
2
3
4
6
7
11
12
14
15
13
Digital Ratchet
GEK series
0.
<<Operations of
Digital Ratchet
>>
1.
<<Operations in the Measurement Mode>>
In this mode, you can control the torque by reading the
display without specifying any target value. It allows
you to tighten an object while checking the torque.
You can convert units for displaying measured values
from N-m to other units.
(Reference value)
2.
<<Unit Conversion>>
3.
<<Operations in the Preset mode>>
4.
<<Custom Settings>>
4-1.
<<Custom Setting: Measurement
Display Mode Setting>>
4-2.
<<Custom Setting: Auto Clear
Mode Setting>>
Specify how long the peak torque value is
displayed in the Auto Clear mode.
Precautions
Precautions
Names and Dimensions
Names of indicators
4-3.
<<Custom Setting: Buzzer
Sound Setting>>
Specify whether to turn ON/OFF the buzzer.
4-4.
<<Custom Setting: Pass/Fail
Mode Setting>>
Specify whether to turn ON/OFF the Pass/Fail
mode, and to use the instrument in the
right-turning or left-turning direction.