CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. shall safeguard its rights to the full extent of the law.
USER MANUAL AND INSTALLATION
COD. 091052 - REV. 07 - DATE 11/2016
Pag.37 di 45
11.1
REPLACEMENT OF OIL FILTER
Unscrew with a specific tool (chain or belt) to replace the cartridge filter, lubricate the gasket of the
new cartridge before attaching the support, the mounting is done by hand, after tightening the
cartridge and placed on the base just 'around ½ ensure the seal.
Be careful before you screw the filter cartridge oil the seal.
Hand tighten the new filter cartridge.
11.2
REPLACEMENT OF SEPARATOR FILTRE
Remove with a specific tool (chain or belt) to replace the cartridge filter, lubricate the gasket of the
new cartridge before attaching the support, the mounting is done by hand, after tightening the
cartridge and placed on the base just 'around ½ ensure the seal.
Be careful before you screw the filter cartridge oil the seal.
Hand tighten the new filter cartridge.