CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. shall safeguard its rights to the full extent of the law.
USER MANUAL AND INSTALLATION
COD. 091052 - REV. 07 - DATE 11/2016
Pag.19 di 45
6
CONNECTION AND START UP
6.1
GENERAL WARNINGS
Before starting compressor for the first time it is compulsory to make sure that:
Incoming voltage is the same as indicated on the number plate .
Main automatic switch on the wall, must follow the engineering data (
see chapter 6.6.1
).
Check that oil level is correct (
see chapter 11.3
).
The electrical connection are made using cables with adequate section (
see chapter 6.6.3
).
CAUTION!
Carefully comply with the SAFETY WARNINGS regarding use of the machine.
For the European market, the tanks are complaint with Directive 87/404/EEC while
the compressors are built in compliance with Directive 98/37/EEC.
Check the label on the compressor and at the beginning of this manual for indication
of your model.