EZHD-TVL4/8/16 DVR Quick Installation Guide
3
Thank you for selecting this KT&C EZHD Series product. For additional information please refer to the complete User
Guide for this DVR series. End users should contact their KT&C Certified Dealer for service. Certified Dealers can
obtain support directly from KT&C.
About This Guide
While KT&C makes every effort to insure the completeness and accuracy of the information contained in this Guide,
we are not responsible for typographical errors or misprints. At the same time, KT&C reserves the right to make
changes to improve the performance of our products at any time without notice, and so the specifications and content of
this document are subject to change without notice. Every effort will be made to include updates in new versions of this
manual and/or online.
Trademarks and Registered Trademarks
Windows and Windows mark are trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries.
HDMI, HDMI mark and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
The products contained in this manual are authorized by HDMI Licensing LLC with the use right of the HDMI
technology.
VGA is the trademark of IBM.
UPnP
TM
is a certification mark of the UPnP
TM
Implementers Corporation.
Other names of companies and product contained in this manual may be trademarks or registered trademarks of
their respective owners.
DVR Pre-Installation
The EZHD series DVRs are highly advanced surveillance equipment that should be installed carefully. Please take into
consideration the following precautionary steps before installation of the DVR.
1.
Keep all liquids away from the DVR.
2.
Install the DVR in a well-ventilated and dust-free area.
3.
Ensure environmental conditions meet factory specifications.
4.
Install a manufacturer recommended HDD.
