KT&C KPC-WDR7000NU, Operation Manual

Page: 38 / 61

4. NAME AND FUNCTION
• BACK
①
. MENU BUTTON
②
. UP BUTTON
③
. DOWON BUTTON
④
. LEFT BUTTON
⑤
. RIGHT BUTTON
⑥
. POWER LED
(The LED turns on when power is supplied)
⑦
. VIDEO OUT JACK
(Used to connect an external video monitor in jack)
⑧
. POWER TERMINAL
(User to connect an DC12V power source)
(Options : AC 24V/DC12V power source)
⑨
. EXTERNAL CONTROL CONNECTOR
A - The camera can be controlled by using external controller such as the keyboard controller.
(RS-485 Communication)
B - Motion detection feature is to generate an alarm whenever movement occurs in the video.
When Motion Mode is set "ON" on the OSD menu of the camera.
-> Normal status : 0V
-> Motion detected : 3.3V
C - It can be switched to DAY mode or NIGHT mode by receiving the signal from external
light sensor or IR LED LAMP.
-> When +3.3V is applied, camera will be switched to BW mode.
-> When 0V is applied, camera will be switched to COLOR mode
CAUTION
: Do not apply higher than 3.3V to D/N connector in order to prevent damage to the
camera.
8
DC12V
DC12V/AC24V
A B C
EXTERNAL CONTROL
C O N N E C T O R
Class 2 Only
Class 2 Only